Shopping basket

Irrigation

  • Length 10 cm, Ø 2,5 cm. Weight 110 gr.

    The strength of the water stream can be adjusted continuously with this solid brass nozzle. It is best to connect it with a hose coupling with a water stop valve.

    10,00 
    availability in stock, can be delivered in 8-9 days
    only 8 item in stock! Additional delivery expected shortly.

  • Water-tap of solid brass, well-made and shapely. ½" thread at back for wall attachment, ¾" thread at spout to fit hose attachment (provided). Height 8 cm, width 4 cm, projection (fitted) 8 cm. Weight 210 g.
    17,50 
    availability in stock, can be delivered in 8-9 days

  • Hot-dip galvanised steel frame. Rubber tires. Brass quarter-turn valve. Height 100 cm, length 60 cm, width 60 cm. Weight 15 kg. Delivery without hose.
    660,00 
    availability in stock, can be delivered in 8-9 days
    only 3 item in stock! Additional delivery expected shortly.

  • Shower head made of aluminum, body and lever made of zamak. Adjuistment screw and connecting plug made of brass, POM plastic. Stainless steel spring. Handle length 8 cm. Shower head Ø 5.5 cm, weight 530 gr.

    This French watering implement with an adjustment ring on the watering head generates three different water flows: a full jet mode, with the water flowing equally from all jets, like a watering can for large bed areas, a weaker stream for more penetrating watering, like for potted plants, and a narrow more focused stream for longer range, more targeted watering.

    68,00 
    availability in stock, can be delivered in 8-9 days

  • A solid hose holder of die-cast aluminium, made in one piece and 5.5 mm thick. Comes without fastening material.
    Small: 20 cm high x 26.5 cm wide, 10.5 cm radial range. Weight 730 g.
    Large: 25.5 cm high, 35.5 cm wide, 14.5 cm radial range. Weight 1.4 kg.

    from 39,00 
    availability in stock, can be delivered in 8-9 days

  • Steel wire gabions (Ø bars max. 4 mm) with zinc-aluminum coating; the base plate and water pipe are made of hot-dip galvanised steel; one brass spigot. Height 90.5 cm, gabions 19 x 19 cm, base plate 28 x 28 cm. Weight 4.9 kg. 4 steel anchors included. We deliver the water tap column assembled, but without filling material and garden hose. With regard to the choice of filling materials there are no limitations. We recommend natural stone – perhaps in different colors, and in layered rows – of grain size 25-60 mm, which you can easily find in a building store. Per column approximately 50 kg of stone are required.
    168,00 
    availability in stock, can be delivered in 8-9 days
    only 3 item in stock! Additional delivery expected shortly.

  • PE-LD. Removable spout with brass screw. Holds 5 l. Height 31 cm, length 80 cm, width 17.5 cm. Material 2.5 mm thick. Weight 670 g.
    27,50 
    availability in stock, can be delivered in 8-9 days

  • Brass. Tubing of PVC, synthetic washers. Tap attachment with 3/4-inch inside thread (for normal taps). Length 20.5 cm. Weight 250 g.
    19,50 
    availability in stock, can be delivered in 8-9 days

  • With detachable sprinkler. Soldered copper, brass sprinkler head. Holds 8.5 l. Height 35 cm, length 51 cm, width 21.5 cm. Metal thickness 0.6 mm. Weight 1.5 kg.
    76,00 
    availability in stock, can be delivered in 8-9 days

  • Round watering can. A traditional can shape, derived from a simple bucket, the so-called English shape: Similar to a bucket handle, one of the two carrying handles runs diagonally over the can; at the back of the can, an additional, smaller handle is attached. Therefore, you can hold the can with both hands, and it is easy to handle when filled to the brim.
    Volume 9 l. Height 41.5 cm, length 58.5 cm, Ø 22.5 cm. Weight 1.6 kg.

    Oval watering can. The French shape: these cans are oval; they are still excellent when full because they sit close to the body, easy to carry with one hand.
    Volume 4 l, can be used as a balcony watering can. Height 32 cm, length 70 cm, width 17.5 cm. Weight 1.5 kg.
    Volume 8 l. Height 44 cm, length 76.5 cm, width 18 cm. Weight 1.9 kg.

    from 36,00 
    availability in stock, can be delivered in 8-9 days

  • Watering pipe, spray head and connector made of brass, lever made of steel, knurled nut made of aluminum. Length 43 cm, spray head Ø 4,5 cm. Weight 300 gr.

    Because of its very gentle stream, this brass and aluminum Japanese watering pipe is the preferred utensil for watering seedlings and cuttings. In addition to targeted watering, due to a tight, drip-free closing ball valve, it has a great range and is therefore used for watering potted plants or for watering on the balcony or in the green house, where it can reach the back row of plants with ease.

    104,00 
    availability in stock, can be delivered in 8-9 days

  • The Y-connector has a single female ¾" inlet (for the most common outdoor taps) and two male outlets with a shut-off mechanism on each outlet. It allows you to connect two hoses to one tap simultaneously.
    Weight 290 g.

    26,50 
    availability in stock, can be delivered in 8-9 days

  • Set of steel 3-legged sprinkler stand and brass circular sprinkler.

    Steel 3-Legged Sprinkler Stand
    ½” inside thread connection for sprinkler tube. Galvanized steel, brass connections, aluminium adjuster knob. Max. height 115 cm. Folded 83.5 x 15 x 15 cm. Weight 2 kg.

    Brass Circular Sprinkler
    A beautifully made circular sprinkler, adjustable to turn in a full circle or partial circles down to 20°. Jet length depends on water pressure: at 4 bar it’s 14 metres, for instance. This can be reduced by adjusting the jet regulator screw, which at the same time increases the jet radius; jet height can also be mechanically adjusted. Connection: ½” outside thread. Brass body, springs and levers of stainless steel. Height 11 cm. Weight 250 g.

    78,00 
    availability in stock, can be delivered in 8-9 days
    only 1 item in stock! Additional delivery expected shortly.

  • Electrogalvanized steel, 2.5 mm thick. Height 31 cm, width 8 cm, Width of holder 10 cm. Weight 700 gr. Comes without hose or faucet.

    Fits on any outdoor mounted faucet, holding the garden hose ready for use. The advantage of this mobile hose hanger made of sturdy sheet steel made in Switzerland is that there is no need to bore holes in the wall to attach a stationary hose holder. The hose and holder can be brought indoors when the temperature drops below freezing and hung up until the following spring.

    23,50 
    availability in stock, can be delivered in 8-9 days

  • Here, the lid is closed, and, on the outer surface at a height of 1.08 m, a brass plug is installed for connecting a hose and operating with a rain collector. This is advantageous because the barrel can be separated from a downspout at a distance of up to 5 m, for example, directly at that place where the water is needed. To safely protect against rust, the barrel is completely hot-dip galvanised in an immersion bath.

    With a hose connector at a height of 1.08 m. Brass spigot with hose socket at a height of 39 cm. Total height 1.17 m, 52 cm Ø. Storage capacity 150 l. Total weight 23 kg. Without can.

    527,00 
    availability in stock, can be delivered in 8-9 days
    only 8 item in stock! Additional delivery expected shortly.

  • Height 3 cm, diameter 9 cm. Weight 1.25 kg.
    68,00 
    availability in stock, can be delivered in 8-9 days

  • Zamak body, brass nozzle, plastic plugs. Height 4.5 cm, 20 cm. Weight 1 kg. Sprinkler adapter nozzle with ½-inch inside thread. Water supply adapter with usual ¾-inch inside thread.
    38,00 
    availability in stock, can be delivered in 8-9 days
    only 6 item in stock! Additional delivery expected shortly.

  • The difference will amaze you – 2.5 mm thick sides with especially good finish at handle and spout. Removable sprinkler. PE-LD.

    Red. Small and light, suitable for balcony. Holds 4 l. Height 29 cm, length 46.5 cm, width 14.5 cm. Material 2.5 mm thick. Weight 340 g.

    Green. The sides are 3mm thick, and the handle and spout are beautifully finished. Holds 10 l. Height 38 cm, length 65.5 cm, width 19 cm, thickness of material 3 mm. Weight 1 kg.

    from 12,80 
    availability in stock, can be delivered in 8-9 days

  • A Barrel with overflow, lid and 33.5 cm high pedestal. Made of hot-dip galvanised and powder-coated green sheet steel. There is a brass tap with hose fitting at a height of 29.5 cm. Total height 120 cm, 52 cm dia. Capacity 150 l. Total weight 23.2 kg.
    504,00 
    availability in stock, can be delivered in 8-9 days

  • Galvanized steel (12 cm Ø). Height 120 cm, width 15 cm, depth 15 cm. Weight 3.7 kg. Comes without hose.
    68,00 
    availability in stock, can be delivered in 8-9 days

  • A sturdy can with a large opening at the top – easy to fill! Detachable sprinkler and movable handle. Galvanized sheet steel. Holds 1.5 l. Height 27 cm, length 41.5 cm, width 14 cm. Thickness of material 0.5 mm. Weight 440 g.
    17,50 
    availability in stock, can be delivered in 8-9 days

  • Range about 3 metres with an entry water pressure of 3 bar, enough to water an area of 28 sq.m. in full circle. Height 4 cm, 3.5 cm. Weight 170 g. Connector: ½-inch outside thread. Without base.
    17,50 
    availability in stock, can be delivered in 8-9 days

  • Mill finished plate zinc. Built-in water outlet with 3/4“ outside diamter brass connector (to attach the faucet). Length 40 cm. Weight 780 gr.

    At least 60% of the rainwater that passes through a downspout roof gutter can be redirected and collected in a barrel or tank. This collector will fit all downspouts with a standard diameter of 100 mm (except those made of copper).

    A reminder:
    This plate zincrainwater collector can be connected to all types of downspouts except those made of copper.

    89,00 
    availability in stock, can be delivered in 8-9 days

  • Fun for the weather buffs – was last summer really the third wettest on record? – but also useful for gardeners who might want to know, for example, exactly how much rain fell during that brief late-afternoon shower (do I have to do the watering or not?!). Our rain-meter is a simplified version of the Hellmann Ombrometer: one point on the millimetre scale of the glass container is equivalent to one litre of rain per square metre. Galvanized steel (8 mm in diameter), length 137 cm. Crystal glass funnel, height 21 cm, 12 cm in diameter max. Weight 1.2 kg.
    55,00 
    availability in stock, can be delivered in 8-9 days

  • Ø inside 1/2“ (= 13 mm), Length 15 m. Weight 1.4 kg.

    The water seeping out along the entire length of this perforated perl hose goes where it should, in the roots, because the hose can be placed precisely next to plants and their roots. There is practically no loss due to evaporation. Because of the slow seeping rate (a max. of 6 l per hour per meter) you can water with the hose for several hours without checking it. The recommended water pressure for the perl hose, made of recyclable rubber and plastics, is at least 0.5 bar. At 0.5 bar the water consumption is 4–6 l/m/h.

    36,00 
    availability in stock, can be delivered in 8-9 days

  • Connecting plug: Brass with a 3/4“ outside thread. For all devices with a 3/4“ inside thread which are not equipped with a connector plug. The plug is intended to be attached to a hose coupling. Weight 40 gr.
    Faucet connector: Brass, with a plug with a 3/4“ inside thread for standard water faucets. Weight 35 gr.

    Compatible with plastic systems.
    For ½ inch garden hoses.

    This brass fitting is the more robust and weather resistant alternative to the usual hose couplings made of plastic. However it is compatible with its plastic counterpart and will accommodate 1/2" garden hoses.

    The hose connectors.
    The connectors for the hose coupling fit all standard ½ inch garden hoses (with a maximum wall thickness of 3 mm and a maximum outer diameter of 18.7 mm). They are easy to tightly fasten on the hose without tools with a union nut and a clamp ring. They can therefore be used at any location with plastic connectors.

    There are hose couplings with and without a water stop. You need two couplings per hose: one without a water stop on the faucet side and one with or without a water stop on the attachment side. The water stop valve is advantageous when you are using spray lances, spray pistols or nozzles without their own shutoff valve because you can stop the flow of water on the spot.

    from 2,60 
    availability in stock, can be delivered in 8-9 days

  • Brass hose coupling: Weight 95 gr.
    Brass hose coupling with water stop: Weight 100 gr.

    A more robust and weather resistant alternative to all established hose coupling systems made of plastic. They are compatible with their plastic counterparts and fit with 1/2“ garden hoses (with a maximum wall thickness of 3 mm and a maximum outer diameter of 18.7 mm). They are easy to fasten with a union nut and a clamp ring on both ends.

    from 8,00 
    availability in stock, can be delivered in 8-9 days

  • With its discrete spout this pitcher made of hot-dipped galvanized sheet steel pours without dripping, while with its wide handle it sits well in one or two hands. As a pitcher it can be an attractive alternative to a watering can on the balcony.

    Hot-dipped 0.5 mm thick galvanized sheet steel, 1,7 l capacity. Height 22.5 cm, Ø 14 cm. Weight 500 gr.

    13,00 
    availability in stock, can be delivered in 8-9 days

  • A beautifully made circle sprinkler, adjustable to turn in a full circle or partial circles down to 20°. Jet length depends on water pressure: at 4 bar it’s 14 metres, for instance. This can be reduced by adjusting the jet regulating screw, which at the same time increases the jet radius; jet height can also be mechanically adjusted.
    The sprinkler is designed to fit on to the stand. Connection: ½" external thread. Brass body, springs and levers of stainless steel. Height 11 cm. Weight 250 g.

    31,00 
    availability in stock, can be delivered in 8-9 days

  • Holds 3.5 l. Height 24 cm, length 72 cm, 18 cm Ø. Weight 2 kg.
    111,00 
    availability in stock, can be delivered in 8-9 days
    only 3 item in stock! Additional delivery expected shortly.

  • Black-coated. Length 30 cm, 6.5 cm in diameter. Weight 800 g.
    31,00 
    availability in stock, can be delivered in 8-9 days

  • Every market garden has had one of these, unchanged in function and design, for over 40 years. Hardly surprising: it’s made of high-quality materials (head and tubing of aluminium, rubber-coated handle, steel lever, brass connector point) is light and handy for effortless operation, has an easy on/off function, and a sprinkler head that produces an even, penetrating ‘rain’. Length 64 cm, sprinkler head 5 cm in diameter. Weight 480 g.
    73,00 
    availability in stock, can be delivered in 8-9 days

  • Sprinkler made of brass and bronze, gaskets made of rubber and plastic. Spike (Ø 12 mm) made of galvanized steel. Height 36 cm, Ø 4,5 cm. Weight 560 gr.

    This rectangular sprinkler waters square surfaces up to 9 m². It is made by the Swiss manufacturer who makes our galvanized steel hose cart s and is also made with out any parts that are subject to wear. The sprinkler is made of brass and bronze, the spike is galvanized steel. For cleaning purposes, or in the rare insztance that it needs a replacement part, the sprinkler can be disassembled completely.

    A reminder.
    All stands, ground sprinklers and other attachments are equipped on the water inlet side with a Rehau brass plug which will fit with any Rehau hose coupling (or commercially available plastic systems). The sprinkler works best with the normal household water pressure of approximately 3 bar. Please bear in mind that pressure may fall off because the hose is too long or because of location, like a steep rise or drop in the terrain.

    125,00 
    availability in stock, can be delivered in 8-9 days

  • With adjustable-range rotating mechanism. Range about 10 metres with an entry water pressure of 3 bar – sufficient to water a circle of about 314 sq.m. in full circle. Height 8.5 cm, 27 cm Ø. Weight 230 g. Connector: ½-inch outside thread. Without base.
    15,50 
    availability in stock, can be delivered in 8-9 days

  • For connecting two hoses. Weight 50 g.
    5,10 
    availability in stock, can be delivered in 8-9 days

  • Holds 9 l. Height 34 cm, length 80 cm, 20.5 cm Ø. Weight 3 kg.
    136,00 
    availability in stock, can be delivered in 8-9 days
    only 7 item in stock! Additional delivery expected shortly.

  • ½" inside thread connection for sprinkler tube. Galvanized steel, brass connections, aluminium adjuster knob. Max. height 115 cm. Folded 83.5 x 15 x 15 cm. Weight 2 kg. Circular sprinkler not included.
    52,00 
    availability in stock, can be delivered in 8-9 days

  • At one end: a conventional piece of piping (with clamps!) to fit on to a ½ inch garden hose with over 3mm-rubber wall thickness (the ‘golden snake’, for example). At the other end: a normal-size connector piece to fit on to ordinary Rehau or plastic nozzles.
    18,00 
    availability available in 3 weeks, place your order now

  • Housing made of die-cast aluminum with the gear unit protected against streams of water and jets made of brass. Water flow-through 0.6–1.3 cubic meters per hour at an entry pressure of 1.5–5 bar. Hose connection with 3/4“ inside thread. Height 15 cm, width 26 cm, depth 16.5 cm. Weight 830 gr.

    This sprinkler with a row of nozzles sweeps in precise angles of 90° to the left or right, and 180°in a semicircle. It will cover rectangular areas of 105 m² (half-way adjustment) or 250 m² (full adjustment). Depending on the adjustment of the control dial on the end of the row of nozzles, it will sprinkle from 15 or just 9 nozzles, making suitable for watering longer, narrower strips.

    98,00 
    availability sold out / no longer available

  • Consisting of a stainless steel container with calibrated polystyrol measuring cylinder and an aluminium holder to hang outside and collect the rain at a height of 1 m. Detailed instructions included. Height 30.5 cm, 11 cm. Weight 720 g.
    94,00 
    availability sold out / no longer available

  • This very durable rubber garden hose is also made by GOLD SNAKE®, with a wall thickness of 3 mm, so that unlike the Gold Snake it can be used without an adapter with a conventional compression connector (like those we offer made of brass as well as the same types made of plastic).

    Inside and outside layers are made of synthetic rubber reinforced with cross-wrapped cloth. Ø inside 1/2“ (= 13 mm), wall thickness 3.5 mm. Length 20 m, weight 4.9 kg. Can be operated at pressures up to 20 bar.
    Delivery note:Delivery without fittings.

    143,00 
    availability sold out / no longer available

  • Range ca. 6.5 m, irrigated surface ca. 130 m². Made of brass. Gaskets made of rubber. Spike Ø 10 mm. Height 52.5 cm, width 7 cm, depth 3 cm. Weight 560 gr. Comes with connector plug.

    As a material with an extraordinary resistance to corrosion, brass is the material of choice for devices used for irrigation, like this Attendorn lawn sprinkler with a rotating nozzle . By adjusting the insertion height of the spike in the ground the range of the spout can be greatly varied.

    104,00 
    availability sold out / no longer available

  • Ø inside 1/2“ (= 13 mm), wall thickness 3.9 mm. Length 20 m, weight 4.8 kg. Can be operated at pressures up to 30 bar.
    Delivery note:Comes without fittings.

    The black hose with the yellow wavy line – the famous Gold Snake – is very labor intensively manufactured. The „soul“ of the rubber hose is extruded over a mandril. This skeleton is wrapped with stiff carcass cord, which is then covered with a rubber cover layer and taped with cloth. All the layers are then vulcanized in a homogeneous hose structure that is buckle and shock proof. The hose will perform in changing temperatures and withstand pressures up to 30 bar.

    284,00 
    availability sold out / no longer available

  • Electrogalvanized steel with a plastic handle. Ø 46 cm, maximum working radius 58.5 cm. Weight 9.4 kg. 3/4“ outer thread for water connections (inlet and outlet). Comes with anchors and screws for fastening to the wall. Hose is not included.

    The double bearing reel can be fastened on the house or garage wall. It is made in Switzerland entirely from electrogalvanized steel and holds 40 meters of 3/4“ hose, or 60 meters of 1/2“ hose (for a maximum of 11 kg). The reel can be swiveled and locked at any length.

    Delivery note:
    Comes without hose.

    279,00 
    availability sold out / no longer available

  • Adaptor with ¾" male thread, can be connected to all accessories, sprinklers and garden showers with a ¾" female inlet without hose fitting.
    Weight 40 g.

    8,00 
    availability sold out / no longer available

  • Spike made of brass. Height 21.5 cm, width 3.5 cm, depth 3 cm. Weight 150 gr. Sprinkler connector with 1/2“ inside thread, hose connector with 3/4“ inside thread. Comes without sprinkler heads.

    This is a practical solution for densely planted beds: the small, stable brass sprinkling spike takes up very little space and can be connected with the standard sprinkler with a 1/2“outer thread. We offer the spike with three heads: the „Brass Circular Sprinkler “, the „Brass Atomizing Sprinkler " and the „Brass Rotating Sprinkler “.

    10,50 
    availability sold out / no longer available

Sprachauswahl / Language selection

X

Lieber Besucher,
willkommen im internationalen Onlineshop von Manufactum.

Bitte beachten Sie:
Unser internationaler Onlineshop wird in deutscher Sprache geführt.

Die englischsprachige Version befindet sich im Aufbau und wird laufend erweitert – das vollständige internationale Sortiment finden Sie in unserem deutschsprachigen Onlineshop.

Bitte wählen Sie:

Dear Visitor,
Welcome to the Manufactum online shop.

Please note:
The language of our international online shop is German.

We are currently setting up the English language version – and updating it constantly. You’ll find the complete international assortment in our German language online shop.

Please pick a shop: