Shopping basket

Gardening Tools

  • H 23,5 x L 85 x W 67 cm. Weight 2.2 kg.
    With this steel wire basket (for instance for leaves in the fall) the volume can be increased to 200 l.

    new price: 37,00 
    availability in stock, can be delivered in 8-9 days

  • Untreated beech. Steel pin. Length 13 cm, 2 cm dia, projection 6.5 cm. Weight approx. 20g.
    12,80 
    availability in stock, can be delivered in 8-9 days

  • A simple, solid tool holder with a pair of 1-cm-thick hooks to take up to four garden tools. Space-saving. Galvanized steel. Height 8 cm, width 10 cm, projection 25.5 cm. Weight 600 g. Comes with attachment screws but without tools.
    17,50 
    availability in stock, can be delivered in 8-9 days

  • Height 8 cm, width 34.5 cm, depth 25 cm. Weight 1.5 kg.
    26,50 
    availability in stock, can be delivered in 8-9 days

  • Carbon steel blades.

    Blade length 3.5 cm, overall length 14.5 cm. Weight 80 gr. Replacement springs available.

    20,50 
    availability in stock, can be delivered in 8-9 days

  • Forged stainless steel prongs. Ash-wood handle. Prongs 1.3 cm apart. Total length 29.5 cm, projection 14.5 cm. Weight 240 g.
    36,00 
    availability in stock, can be delivered in 8-9 days

  • Blade of chrome steel alloy. Total length 32.5 cm, length of blade 17 cm. Weight 90 g.
    24,50 
    availability in stock, can be delivered in 8-9 days

  • Vegetable-tanned leather 3.5 mm thick. Height 16.5 x width 8 x depth 5.5 cm. Weight 110 g.
    35,00 
    availability in stock, can be delivered in 8-9 days

  • 120 m green garden twine in a tin. One practical feature is that it can be pulled out with one hand.
    12,00  Basic price: 0,08 €/1m

    availability in stock, can be delivered in 8-9 days

  • Tub made of powder coated sheet steel, frame made of galvanized zinc, rails made of beechwood. With a pneumatic tire mounted on a steel rim with a sleeve bearing. Volume 90 l. Wheel Ø 40 cm. Height 63.5 cm, length 1.45 m, width 66.5 cm. Weight 15.5 kg.
    With its minimal weight, a very low center of gravity and pneumatic tires made of rubber, this wheelbarrow is especially maneuverable. We deliver the wheel barrow in kit form. You can put it together in a few minutes. With a pneumatic tire mounted on a steel rim and a sleeve bearing.

    196,00 
    availability in stock, can be delivered in 8-9 days

  • Strong, sharp cutting head of carbon steel with hardened blade. Birch-wood handle.
    Blade length 11.5 cm, total length 32.5 cm. Weight 180 g.

    Right-handed. Left-handed.

    27,50 
    availability in stock, can be delivered in 8-9 days

  • Glazed, polished, and with hole for hanging up; brass alloy thread (normal size). Length 150 cm, 25 mm in diameter. Weight 530 g.
    13,80 
    availability in stock, can be delivered in 8-9 days

  • Carbon steel blades, handles of Japanese oak. Total length 73 cm, length of blade 20 cm. Weight 1 kg.
    84,00 
    availability in stock, can be delivered in 8-9 days

  • The two rows of prongs make it suitable for larger area work. Galvanized steel. Height 7 cm, width 40 cm. Weight 1.5 kg. Comes without handle.
    84,00 
    availability in stock, can be delivered in 8-9 days

  • Cylinder (5 cm dia.) with solid steel axe head. Piston weight 3.5 kg, total weight approx.

    5.5 kg. Length (not extended) 110 cm.

    87,00 
    availability in stock, can be delivered in 8-9 days

  • With a bigger diameter, and suitable for a variety of garden tools. Shaped conical top.
    Length 160 cm.

    from 11,50 
    availability in stock, can be delivered in 8-9 days

  • Made In Germany. Hand forged carbon steel head (C45). Handle made of clear lacquered ash wood. Blade 11.5 x 7 cm. Fork 10 x 6.5 cm. Total length 45 cm. Weight 630 gr.

    With a blade hoe on one side and a two prong hoe on the other side, this double hoe is especially versatile for planting, weeding and loosening up the ground. The longer handle also extends the range of the tool. The length of the handle and weight of the head are so well matched that the hoe falls without any great exertion into the ground where it can be deftly maneuvered.

    26,50 
    availability in stock, can be delivered in 8-9 days

  • Hardened carbon steel blades, non-stick coating. Synthetic handles with clip. Comes with oil-pad for blade care and cleaning. Total length 33 cm, length of blade 12.5 cm. Weight 330 g.
    47,00 
    availability available in 3 weeks, place your order now

  • With reinforced socket, outer tines and bow. 22 flat tines, size ajustable from 30 to 50 cm. Zinc-coated steel. Weight 690 g.
    26,50 
    availability in stock, can be delivered in 8-9 days

  • A highly effective tool with a galvanised blade, for removing undesired growth between paving stones without having to resort to herbicides. The blade is set deeply into the handle and firmly secured with double rivets. Tempered, galvanised steel, clear varnished beech wood handle.
    Length 23 cm, width 7 cm. 110 g.

    11,00 
    availability in stock, can be delivered in 8-9 days

  • Made of squared pinewood struts with rounded edges (length 6 cm). Oak foldaway bar.

    Height 85.5 cm, width 56 cm, depth 74.5 cm. Weight 12.5 kg.

    126,00 
    availability in stock, can be delivered in 8-9 days

  • Stainless steel frame (Ø 2 mm), plastic hand-grip.

    Length 23.5 cm, width 6.5 cm, height 5.5 cm. Weight 60 g.

    11,00 
    availability in stock, can be delivered in 8-9 days

  • The cutting-head blades are of extremely sharp carbon steel (which can be re-sharpened) and will easily cut through branches up to 3 cm thick – note the special notches on the leading edge of the blade that give an extra-smooth cut. Beechwood handles.

    Total length 70 cm, length of blade 9 cm. Weight 1.3 kg.

    84,00 
    availability in stock, can be delivered in 8-9 days

  • Pigskin, cuff and lining made of 100% cotton. The blue gloves come in size 2.5, the orange gloves in size 4 and the green gloves come in size 6.
    from 8,00 
    availability in stock, can be delivered in 8-9 days

  • Good for mowing less woody underbrush in those corners in the garden which are too cramped for a big scythe. The hand-forged blade is ground on both sides and bored out to hang the scythe without dulling the blade. Made in Baden-Wuerttemberg.

    Carbon steel blade, beechwood handle . Blade length 34 cm, total length 39 cm. Weight 320 gr.

    29,50 
    availability in stock, can be delivered in 8-9 days

  • Thanks to their slim, pointed shape and extra-sharp blades, these secateurs can be particularly recommended for cutting the more delicate, soft-stalked type of plant: they are guaranteed not to squash or bruise. They’re also good for thinning and pruning. The lightweight aluminium handles are specially shaped for easy grip.

    Blades of carbon steel, aluminium handles, overall length 21.5 cm, blade length 5.5 cm. Weight 160 g

    38,00 
    availability in stock, can be delivered in 8-9 days

  • Of 350g/sq.m. cotton canvas cloth. Piece-dyed. Adjustable waist. Sleeveends reinforced with striped corded ribbon. 2 patch breast-pockets with button flaps, and 2 diagonal front zip pockets. Patch pocket with button flap on the left sleeve. Sturdy inside pocket. Striped lining. Metal buttoning studs. Length of back (size 52) 65 cm. Machine wash at 30°C.
    150,00 
    availability in stock, can be delivered in 8-9 days
    only 5 item in stock! Additional delivery expected shortly.

  • Saw blade made of non-alloy tool steel. The handle is made of Japanese poplar. Blade length 36.5 cm, total length 1.3 m (folded length 90 cm). Weight 350 gr.

    Like all tools with cutting edges from Japan, this saw is also extremely sharp. It is also very light. With its long handle it is ideal for pruning trees and bushes at heights which might only be reached with a ladder with a normal handsaw. It owes its light weight to the poplar wood handle, which is flexible as well as light.

    66,00 
    availability in stock, can be delivered in 8-9 days

  • This short, slim hand rake will help you get rid of leaves and stones effortlessly from smaller flower or vegetable beds. The sprung prongs make the work even easier! Length of prongs 14.5 cm. Total length 41 cm, width 14.5 cm. Weight 210 g.
    20,50 
    availability in stock, can be delivered in 8-9 days

  • Stands up by itself and folds up to a very small size if not in use. Woven fabric made of polyethylene, two handles. 56 x 56 x 46 cm. Capacity of 100 l. Weight 270 g.
    16,50 
    availability in stock, can be delivered in 8-9 days

  • It splits pieces up to 40 cm long. The blade can be sharpened. Cast iron. For securing the blade when not in use the device is equipped with a steel locking ring that can be simply elevated in order to use.

    Height 58 cm, width 8 cm, depth 13.5 cm. Weight 4.8 kg. Fastening material for mounting on the wall is included.

    178,00 
    availability in stock, can be delivered in 8-9 days

  • Manufactured from cotton and vegetable-tanned goat leather. Hand washing is possible.
    25,50 
    availability in stock, can be delivered in 8-9 days

  • Hand-forged stainless steel. Ash-wood handle.

    Length 39.5 cm. Width 3.5 cm. Weight 190 g.

    32,00 
    availability in stock, can be delivered in 8-9 days

  • A useful bag of sturdy cotton weave (used otherwise for deck-chairs) with eight side pockets that give you enough room for the transport and storage of small garden tools. The middle compartment is big enough for gloves, small bags of manure or flower bulbs (not included in delivery!). 100% cotton (310 g/sq.m.) washable at 40°C. Height 26.5 cm, width 31 cm, depth 22 cm. Weight 250 g.
    51,00 
    availability in stock, can be delivered in 8-9 days

  • Powder-coated steel rod. Stainless steel blade. Handle and adjustment screw heads made of plastic. 30 cm-Ø Wheel made of polyamide. Height 1.24 m, length 1.24 m, total width 50.5 cm. Hoe width 25 cm, blade width 5 cm. Weight 6 kg.

    With its sharp blade the steel loop hoe undercuts only the upper layer of topsoil, shaving off weeds with flat roots. Especially effective in extensive vegetable gardens and on unpaved paths. It is also easy to use in harder ground. The rod which holds the cutting head is continuously adjustable to accomodate the height of the user. The wheel hoe is delivered in pieces and can be assembled in a few steps. Instructions are included.

    185,00 
    availability in stock, can be delivered in 8-9 days
    only 4 item in stock! Additional delivery expected shortly.

  • Pruning blades made of carbon steel, with handles made of beechwood.

    Blade length 6.5 cm, overall length 21 cm. Weight 280 gr. With a rugged metal loop to close the tool. Delivery in a wooden box.

    78,00 
    availability in stock, can be delivered in 8-9 days

  • Designed for the clean drilling of holes (about 9 cm wide) for fence poles, posts and foundations. The tip of the drill is centred to facilitate accurate work even under cramped conditions, as earth is only excavated at the spot where the drill penetrates. The double-spiral cutting and removal technique ensure that every bit of earth cut out is removed from the drill hole so you have complete control over its depth. Made of matt steel with ash-wood handle. The cutting spiral is sharpened and welded on to the drill. Drill 9 cm Ø, length 46 cm. Total length 106 cm, width 49.5 cm. Weight 2.4 kg. Not suitable for very stony soil.
    94,00 
    availability in stock, can be delivered in 8-9 days

  • Of 360g/sq.m. cotton twill, sanforized. With raised rear section to protect lower back from the cold, and the usual dungaree pockets made of the same material, plus 2 studded rear patch pockets with a double folding ruler pocket at the right and brass zip security pocket on the inside breast section. Adjustable waist. Width of bottoms (size 50) 50 cm. Machine wash at up to 40°C.
    from 94,00 
    availability in stock, can be delivered in 8-9 days
    only 3 item in stock! Additional delivery expected shortly.

  • Hand tool for weeding and soil loosening. The sharp blade cuts through roots of every thickness and is also shaped to make small holes for planting. Blade 7 x 5 cm. Fork 7 x 4.5 cm. Overall length 33 cm. Weight 270 g.
    38,00 
    availability in stock, can be delivered in 8-9 days

  • Comes with a leather blade sheath. Overall length 48 cm, length of the cutting edge 8 cm, weight 700 g.
    125,00 
    availability available at the beginning of September, place your order now

  • 1 Element. Made of hot-dipped flexible galvanized steel.

    Height 13 cm, length 1.18 m. Thickness .6 mm. Weight 790 gr.

    10,00 
    availability in stock, can be delivered in 8-9 days

  • Blade of double-layered steel: soft iron and hard carbon steel are forged together, hardened and set, producing an extremely sharp, flexible, non-breakable blade that can be sharpened to a fine edge. Total length 41 cm, length of blade 19.5 cm. Weight 170 g.
    23,50 
    availability in stock, can be delivered in 8-9 days

  • Steel, partly matt finished. Width 14 cm, cutting width 3 cm. Weight 450 g. for handles up to 25 mm in diameter. Handle not included.
    23,50 
    availability in stock, can be delivered in 8-9 days

  • A smaller, lighter version of an axe. Its design and extra steel handle protector at the head make it ideal for cutting smaller wood pieces for fire-place or stove. The hickory-wood handle is just long enough to be used with two hands if necessary. Length 48 cm. Weight 1.5 kg. Comes with leather blade-protector.
    119,00 
    availability in stock, can be delivered in 8-9 days

  • Of 350g/sq.m. cotton canvas cloth. Piece-dyed. Metal studded hip pockets. 2 Back pockets with zip fastener. Two patch pockets with stud-press flaps at upper leg; right-hand pocket with additional pocket for mobile phone. All inside pockets of tough lining material with piped edges.
    Metal D-ring. Width of bottoms (size 52) 45 cm, adjustable. Machine wash at 30°C.

    155,00 
    availability in stock, can be delivered in 8-9 days
    only 6 item in stock! Additional delivery expected shortly.

  • This handy little chopper combines a normal-size axe-head with a very short handle. It’s well balanced, fits your hand perfectly, won’t be too big for your tool-box, and – with its leather loop and head-cover – is fine to take with you on a hiking or rough camping trip. Hand-forged head with hardened, polished cutting edge. Hickory handle. Length 24.5 cm, Length of cutting edge 7.5 cm. Weight 580 g. Comes with leather head-protector and loop.
    90,00 
    availability in stock, can be delivered in 8-9 days

  • Made of recycled rubber. Stands up to frost and strong sunlight. To be dug about 12 cm into the ground.

    Height 15 cm, length 5 m, thickness of material 3 mm. Weight 2.4 kg.

    24,80 
    availability in stock, can be delivered in 8-9 days

  • Its extra-long forged steel neck gives it more stability. The prongs are slightly conical. Prong length 6.5 cm. Total length 154 cm, width 34 cm. Weight 1.5 kg.
    94,00 
    availability in stock, can be delivered in 8-9 days

  • With drainage hole. Steel. Fire grid of matt coated steel.

    Height 25 cm, 55 cm Ø. Weight 21 kg.

    365,00 
    availability in stock, can be delivered in 8-9 days

  • Shaping accentuated by quilted seams and stitching. Extra mobility thanks to darts at elbows. Side flaps at cuff to adjust width. Sleeve slits and cuffs reinforced with ribbed bands. 2 waist pockets; 1 button-up patch breast pocket with extra inside pocket and pen loop holder. 100% cotton. Metal studs. All quilting in saddler’s yarn. Olive green. Back length 57 cm (size 38). Machine wash at 30° C.
    146,00 
    availability in stock, can be delivered in 8-9 days
    only 7 item in stock! Additional delivery expected shortly.

  • Untreated larch with knot holes, 20 mm thick. The roof is made of sheet zinc, fittings and hooks are galvanized steel. Height 2 m, width 95 cm, depth 58 cm. Door 165 x 49 cm. Shelves 48 x 19 x 2 cm, placed at intervals of approx 35 cm. Weight 90 kg.

    A solid cupboard made of weather resistant larch. Inside are five shelves, two double hooks and three single hooks for storing garden tools and accessories and work clothing. The cupboard including the joints is made with tongue and groove in Lüneburg. The cupboard comes with a high-quality case lock , made of solid galvanized steel, like the fittings.

    A tip for users:
    The wood will adapt to the climate, the surface changing over time (small cracks and deformations may occur). The color may also change to the typical grey, which can be postponed by applying a lightly colored wood oil). If you do oil the wood, remember to use the same oil inside as outside. The cupboard is delivered completely assembled, but without contents.

    979,00 
    availability in stock, can be delivered in 19-20 days (by transport company)

  • Hand-forged stainless steel. Blade 24.5 x 11.5 cm. With double-ended handle of untreated ash-wood. Total length 94.5 cm. Weight 1.4 kg.
    97,00 
    availability in stock, can be delivered in 8-9 days

  • 100% cotton. With two snap hooks and an adjustable neck strap. Holds 7 kg. Length 43 cm, 70 cm when opened, width 37 cm. weight 510 gr.

    This picking apron has a roomy harvest pouch to be worn directly on the body. Based on the vintner’s apron, the pouch opens downwards when the two snap hooks are loosened in order to easily and gently deposit what has been harvested. The durable pouch is made from robust cotton canvas.

    50,00 
    availability in stock, can be delivered in 8-9 days

  • For planting, transplanting, soil-loosening and weeding. Blade 11.5 x 6 cm. Total length 39 cm. Weight 410 g.
    20,50 
    availability in stock, can be delivered in 8-9 days

  • A slim tool for loosening soil and for weeding and hoeing. Carbon steel. Fork 10 x 7 cm. Blade 10 x 6.5 cm. Total length 137 cm. Weight 890 g.
    34,00 
    availability in stock, can be delivered in 8-9 days

  • Suitable for all types of soil (also heavy soil). Stainless steel blade and screws. Shaft made of birchwood of Russian origin.

    Narrow. With narrow blade, the gradient cannot be adjusted. Head length 10 cm, width 8 cm. Total length 1.34 m. Weight 720 g.

    Wide. With wide blade, the slope can be adjusted to three different levels. Head length 14 cm, width 13 cm. Entire length 1.37 m. Weight 840 g.

    from 38,00 
    availability in stock, can be delivered in 8-9 days

  • Aluminum, nylon rims, steel connecting parts, rubber handles. Volume 150 l., Height 59 cm., Length 1.44 m., Width 75 cm., Wheel Radius 49 cm., Weight 12.5 kg., Load Weight max. 150 kg.
    397,00 
    availability in stock, can be delivered in 8-9 days

  • Blades of forged C60 carbon steel. Varnished beechwood handles, coated steel screws. Blade length 14.5 cm, total length 38.5 cm. Weight 490 g.
    55,00 
    availability in stock, can be delivered in 8-9 days

  • Cotton and polyester.
    7,00 
    availability in stock, can be delivered in 8-9 days

  • One of the best natural grinding stones from the Belgian Ardennes. It consists of two separate clay slates glued together to form a somewhat irregular double-layer block. The blue/black side is used for the preparatory coarse filing work, while the light-coloured side with its sandy surface looks after the finer finish. Wet before use. Weight approx. 180-220 g.
    27,00 
    availability in stock, can be delivered in 8-9 days

  • Lined with a warming nap of pure new wool. The vest, made for us exclusively with extra long back for kidney protection, has two large pockets at the front, one inside pocket and a durable metal zipper at the front. With perfectly finished seams. Manufactured in East Westphalia by FHB, makers of the traditional apparel for German craftsmen.

    Outer material 100% cotton (fabric weight 300 gr./sm). Lining 100% new wool.

    98,00 
    availability in stock, can be delivered in 8-9 days

  • Galvanized steel. Height 1.5 cm, width 79 cm, depth 26 cm. Weight 19 kg.
    229,00 
    availability in stock, can be delivered in 8-9 days

  • With forged carbon steel blades, hard-plated and hollow-ground. They have a wavy cutting edge, which gives you a better grip on what you’re cutting, plus hollow grinding gives a cleaner cut and has a self-sharpening effect. Buffers of rubber and cork, beechwood handles. Total length 55.5 cm, length of blade 22.5 cm. Weight 1.3 kg.
    73,00 
    availability in stock, can be delivered in 8-9 days

  • Ready-sharpened and polished for mowing. Forged high-alloy 60-cm steel blade. Handle of tubular steel, length 150 cm. Weight 1.8 kg. Part-assembled, with instructions enclosed.
    94,00 
    availability in stock, can be delivered in 8-9 days

  • This hoe has a long, narrow blade particularly useful for planting long-rooted plants (or getting rid of weeds with long roots!). Blade 17 x 3.5 cm. Total length 39 cm. Weight 410 g.
    20,50 
    availability in stock, can be delivered in 8-9 days

  • Cap height 45 mm. Stencil height 6.5 cm, stencil width 5 cm, thickness .25 mm.
    Weight 5 gr.

    Letters from A to Z and symbols. 27 stencil set.
    Numbers from 0 to 9. 10 stencil set.

    from 10,50 
    availability in stock, can be delivered in 8-9 days

  • Bag of 100% canvas (670g/sq.m.) with panama weave and no extras. Belts and handles 100% canvas. The handles are reinforced with round cord.

    Length 105 cm, width 52 cm. Weight 490 g. Wood not included.

    73,00 
    availability in stock, can be delivered in 8-9 days

  • For smaller branches of up to 2 cm ?. Steel blades. Ergonomic grip handles with plastic covering. Blade length 6 cm, total length 20.5 cm. Weight 220 g.
    72,00 
    availability in stock, can be delivered in 8-9 days
    only 6 item in stock! Additional delivery expected shortly.

  • Chrome-tanned cow’s leather, rug remnants. 8.5 x 11 x 16.5 cm. Each pad weights 170 gr.
    47,00 
    availability in stock, can be delivered in 8-9 days

  • For use in already planted areas. The thin blade makes digging out weed roots easy – also good for breaking up larger herbaceous plants. The notches in the extra-sharp blade make sure that the roots don’t slip away from the cutting edge.

    Blade with tread, 22 x 11 cm. Total length 108 cm. Weight 1.6 kg.

    147,00 
    availability in stock, can be delivered in 8-9 days

  • Aluminum pipe (Ø 1,5 cm), tong made of steel, handle wrapped in plastic. Tong width 3.5 cm, max. opening 6.5 cm. Total length 95.5 cm. Weight 250 gr.

    Municipal cleaning services use tongs like these. The lightweight sturdy aluminum tongs come from Wilhelmshaven. With their widened grip they can also be used for plucking flat growing weeds. The pincers can be used in many ways, like rescuing something that has fallen in the pond, while indoors they can be used for all work involving grasping objects overhead , beneath the cupboard or behind the shelf.

    41,00 
    availability in stock, can be delivered in 8-9 days

  • A Hand Shovel and Hand Hoe.
    71,00 
    availability in stock, can be delivered in 8-9 days

  • Classic English shape. Apart from ordinary digging, a good spade is essential for splitting up shrubs, making holes for bigger plants, marking out planting areas or ‘reclaiming’ wild areas. Blade with treads to protect your boots, 28 x 16 cm. Total length 114 cm. Weight 2.1 kg.
    147,00 
    availability in stock, can be delivered in 8-9 days

  • Galvanized steel wire, Ø 4 mm. Plastic-wrapped handle. Tine length 4.5 cm, total length 20.5 cm. Weight 45 gr.

    The light, easy-to-use tool made of a single piece of bent steel wire originally came from New Zealand, where it's been used for more than 25 years for in the most varied work in the garden. With its single slender tine which can be worked directly into the roots of a plant it was originally developed for weeding, but it can just as well be used for potted plants, for cleaning mortar joints, pricking etc.

    10,50 
    availability in stock, can be delivered in 8-9 days

  • Folding knife with carbon steel blade , handle halves made of cherry wood, brass rivets. Handle length 8.5 cm, blade length 6 cm. Weight 65 gr.

    A gardener always has a knife in his pocket. This one is made by Otter Messer in Solingen and is equipped with a folding, high-quality carbon steelblade that keeps its edge. Actually intended for making cuttings, the little knife can also be used to cut flowers or herbs, opening sacks of earth or fertilizer or packets of seed. Or cutting cord, and so on.

    51,00 
    availability in stock, can be delivered in 8-9 days

  • 2 wing pockets and 1 coin pocket at front, 2 patch pockets at rear. Leg pocket for ruler. Metal studs and studded buttons. All quilting in saddlers’ yarn. Width at bottom 44 cm (= size 38). Machine wash at 30° C.
    146,00 
    availability in stock, can be delivered in 8-9 days

  • 100% canvas made of cotton, fabric weight approx. 575 g/m², pollutant-free impregnated. Cow split leather. Rivets and snaps made of brass. Length 31.5 cm, width 60.5 cm. Weight 330 gr.
    51,00 
    availability in stock, can be delivered in 8-9 days

  • These gloves have extra long cuffs that would protect not only your hands but also your forearms if you decided to work in undergrowth, with roses, or amongst stinging nettle. Made out of pigskin leather, and the cuffs from calf leather.
    43,00 
    availability in stock, can be delivered in 8-9 days
    only 2 item in stock! Additional delivery expected shortly.

  • This planting spade is ideal for working in small and narrow plot patches or digging when kneeling down. Technically it is like a cross between a spade and a trowel and is mostly used for eradicating roots, breaking up the soil or preparing plant holes.
    The combination of the pointy scoop, the slightly sharpened edges and the well-shaped handle makes working on hard soil and persistent roots easy. Stainless steel, hand-forged; length 17 cm, max. width 17 cm. Ash handle.
    Total length 57 cm, weight 550 g.

    62,00 
    availability in stock, can be delivered in 8-9 days
    only 5 item in stock! Additional delivery expected shortly.

  • Birch ply-wood. 8 compartments each 9 x 9.5 cm. big. Height 12 cm, width 38 cm, depth 19 cm. Weight 420 g.
    10,00 
    availability in stock, can be delivered in 8-9 days

  • Ladies’ spade, lightweight and handy. Blade of 25 MnB5 steel, ashwood handle. Total length 117 cm. Blade 25.5 x 16 cm. Weight 1.4 kg.
    51,00 
    availability in stock, can be delivered in 8-9 days
    only 5 item in stock! Additional delivery expected shortly.

  • Length 79.5 cm, weight 3.3 kg.
    140,00 
    availability in stock, can be delivered in 8-9 days

  • Lighter in weight, lighter in use. A narrower version of the above. Galvanized steel. Height 7 cm, width 13 cm. Weight 730 g. Comes without handle.
    62,00 
    availability in stock, can be delivered in 8-9 days

  • Head of hand-forged stainless steel. Ash-wood handle. Prong length 7 cm, total length 171.5 cm, width 26 cm. Weight 1.3 kg.
    83,00 
    availability in stock, can be delivered in 8-9 days

  • Blade (30 x 22 cm) of painted boron steel. Varnished ash handle. Total length 148 cm. Weight 1.7 kg.
    67,00 
    availability in stock, can be delivered in 8-9 days

  • Blade and anvil made on non-stick carbon steel. Blade length 8 cm, total length 71.5 cm. Weight 1.6 kg.

    This anvil pruner, our most powerful shears, easily cuts through branches up to five centimeters thick. With its long wooden handles and wide open mechanics it can also reach low branches over the head and especially for thinning out old shrubs and bushes. Old, hard or thick branches are child’s play for the shears. The effort expended for this work is minimized by a special double lever action.

    73,00 
    availability in stock, can be delivered in 8-9 days

  • You will enjoy working with this narrow, lightweight rake, maneuvering between plants, loosening up the ground or removing weeds that don't have too deep roots. 5 tines, length 7 cm. Handle made of oak. Total length 1.33 m, width 12.5 cm. Weight 690 gr.
    Newly proportioned tool for tireless work in the garden The advantages of lightweight garden tools are obvious and those who have struggled with utensils that are too large or heavy know how strenuous or even unhealthy it can be. Our tools are forged by the Schneeboer toolsmiths in Friesland and sit lighter in the hand. Spades, garden forks, weeders and rakes don’t come any smaller but these are by no means „ladies tools“. The secret lies in the balance of their proportions which create the optimal preconditions for tireless work. No corners have been cut with material and workmanship: in the Schneeboer tradition the springs and grommets on the handle mount are forged from tough, high alloy stainless steel, while the working parts are made from easier to forge low alloy steel . All manufacturing steps are done by hand.

    69,00 
    availability in stock, can be delivered in 8-9 days

  • Saw blade made of stainless steel. Locking ring made of steel. Handle made of beech, painted matt. Blade length 12 cm, handle length 16.5 cm. Weight 110 gr.

    French model.
    This is the handiest saw we offer because the short, sharp blade folds up like a pocket knife. The saw is manufactured by Opinel, the French specialists for good but economical cutting tools at the foot of the Savoy Alps. The saw is furnished with the typical Opinel, simple but effective blocking system: after the blade has been extended a ring at the end of the handle is turned, locking the blade. The folding saw can then be safely pulled back and forth.

    29,00 
    availability in stock, can be delivered in 8-9 days

  • Blade made of stainless steel, shank and handle made of oiled ashwood. 12.5 x 12.5 cm. Total length 1.63 m. Weight 770 gr.
    The typical Dutch „scuffle hoe“, what might be called a drag hoe, is an ideal tool for the preparation of flat ground. With its angled, sharpened blade it will skim close to the surface, „undercutting“ flat growing weeds which can remain on the bed as additional organic matter. Sneeboer manufactures a scuffle hoe with a blade with a serrated edge, which increases the force potential of the blade by 30%.

    73,00 
    availability in stock, can be delivered in 8-9 days

  • Forged aluminium. Length 22 cm, length of cutting edge 4.5 cm. Weight 860 g.
    42,00 
    availability in stock, can be delivered in 8-9 days

  • Ash. Bars 1.2 cm in diameter, struts 4.5 x 4.5 cm. height 80 cm, width 37.5 cm, depth 33 cm. Weight 6.3 kg. Comes without tools.
    147,00 
    availability in stock, can be delivered in 8-9 days

  • This 2-pronged rose fork is a tried and tested article of rose care. Thanks to its two strong, extra-long prongs, the fork will loosen and aerate even clay soil right down to the lowest root tips of your plants.
    With two prongs, length 24 cm, distance between prongs 5.5 cm. Overall length 119 cm, width 14 cm. Weight 1.6 kg.

    147,00 
    availability in stock, can be delivered in 8-9 days
    only 7 item in stock! Additional delivery expected shortly.

  • ??Blade and tip made of stainless steel, handle made of poplar.
    Blade lenght 9 cm, total length 40 cm. Weight 150 gr.

    What’s special about it is the bent blade, a sharpened face side and a serrated gouger. The slightly curved blade which pulls perfectly through the joint is made from such rugged stainless steel you can use it like a hoe. The serrated gouger cuts through the most stubborn woody plants. The 33 cm long handle extends the range of the tool quite practically.

    28,50 
    availability in stock, can be delivered in 8-9 days

  • Hard-chrome plated tool steel. Handle jacketed in plastic. Lock and dampers made of plastic. Blade length 4.5 cm, total length 18.5 cm. Weight 110 gr.

    In Japan these shears are mainly used for the harvest, but they can also be used for trimming withered leaves in shrub beds or harvesting currants or cut flowers. Their professional quality features solid plastic dampers which make the work less fatiguing by cushioning the cutting motion. The extremely sharp pointed blade made of Japanese tool steel is coated with an additional layer of hardened chromium plating to protect against rust and repel dirt. The blade will also cut materials like paper, cardboard and plastic with ease, which is why we can recommend it without reservation for household shears.

    20,50 
    availability in stock, can be delivered in 8-9 days

  • Tool head stainless steel, handle made of ash. Blade 5.5 x 15.5 cm. Total length 1.68 m. Weight 1 kg.
    72,00 
    availability in stock, can be delivered in 8-9 days


  • 39,00 
    availability in stock, can be delivered in 8-9 days


  • 39,00 
    availability in stock, can be delivered in 8-9 days

  • Powder-coated steel. Plough height 11.5 cm, width 28 cm, depth 32 cm. Material thickness 2 mm. Total height 29.5 cm. Weight 1.8 kg.

    The plough can be installed on the Swedish loop hoe frame instead of the hoe attachment. You can dig trenches between the rows of plants and push up furrows of earth. The deeper the tool sinks into the earth, the wider the furrows. You can control the depth with the height adjustment on the holding rod.

    94,00 
    availability in stock, can be delivered in 8-9 days
    only 7 item in stock! Additional delivery expected shortly.

  • Blade 16 x 6.5 cm. Total length 1.2 m. Weight 920 gr.
    ?With its narrow, pointed shape , polished on both sides, the hardened carbon steel blade (HRC 58) of this Japanese garden hoe resembles a ploughshare. It can be used in densely planted beds for weeding, chopping and loosening the earth. Small planting holes and furrows can be prepared with its pointed nose. The handle is made of light, unbreakable chinkapin wood, which is why we can offer the hoe with a longer handle than is usual in Japan.

    44,00 
    availability in stock, can be delivered in 8-9 days

  • Hand-forged carbon steel. Length 18 cm, width 7 cm. Weight 210 g. Oil from time to time (linseed or owatrol oil). Comes in a wooden box.
    20,00 
    availability in stock, can be delivered in 8-9 days

  • Length 25.5 cm, width 3 cm. Thickness 3 mm. Weight 120 g.
    32,00 
    availability in stock, can be delivered in 8-9 days

  • Hand-forged stainless steel, handle made of ash wood. Conically shaped hollow tines: Length 10 cm, Ø 2 cm. Total length 1.07 m, width 33 cm. Weight 1.6 kg.

    With its sturdy hollow tines, this lawn aerator easily perforates ground that has been stamped flat. It deals effectively with compacted earth, where moss forms and the water collects which cannot seep into the ground. The head of the tool is forged by Sneeboer from stainless steel. The special hollow tines are conically shaped in order to prevent the aerator from plugging with clumps of earth and getting stuck in the ground.

    114,00 
    availability in stock, can be delivered in 8-9 days
    only 9 item in stock! Additional delivery expected shortly.

  • Useful for working in the garden, providing a soft, warm alternative to the ‘knee-benches’ that some gardeners use. Ours is like a cushion, with top cover and filling both of wool. The lower cover is of nylon, strong and water-proof so you can kneel or sit on damp ground. Washable (cold wash please: it’s wool!). Made with 2 generous carrier loops. 12 x 50 x 35 cm. Weight 1.2 kg.
    36,00 
    availability in stock, can be delivered in 8-9 days

  • 3 prongs made of forged stainless steel. Handle made of ash treated with linseed oil. Brass rivets. Prong length 14.5 cm, spacing 5 cm. Total length 1.73 m, width 12.5 cm. Weight 1.1 kg.
    In the Sneeboer manner, with forged functional components and an extra-long socket made of tough, high alloy steel riveted to the shaft. The prongs on our cultivator are extra-long and wide but the tool head is not wider than 13 cm, so that it maneuvers well in closely planted borders and between rows of plants in vegetable beds.


    94,00 
    availability in stock, can be delivered in 8-9 days

  • A light, airy calfskin glove, with a nice feel and ideal for working in flower-bed or vegetable garden. The gauntlets are reinforced with a cotton band, and a broad piece of elastic inside the back of the hand ensures a good fit.
    36,00 
    availability in stock, can be delivered in 8-9 days

  • This is the maker’s name for this handy little implement. Its crooked, pointed blade will remove weeds from the most inaccessible of spots and will do an equally impressive tidy-up job on overgrown or mossy joins or cracks on patio, doorway or brick garden paths. Length 27 cm. Weight 120 g.
    23,50 
    availability in stock, can be delivered in 8-9 days

  • Sneeboer manufactures these dibbles in the traditional proven form: The curved handle allows the tip to be forcefully punched into the ground and thanks to the stainless steel tip it also makes punching deeper holes easier. And since the tip is firmly riveted to the ashwood handle, it will not disappear into the plant hole or anywhere else soon.

    Handle made of waxed ashwood. Tip stainless steel, length 12.5 cm, Ø 3 cm. Total length 28.5 cm. Weight 240 gr.

    34,00 
    availability in stock, can be delivered in 8-9 days

  • The holster is made of plastic, the belt material is rubberized leather. Rivets made of copper and brass. Snaps made of metal. Length 52.5 cm, width 14 cm, depth 2 cm. Weight 390 gr.

    This holster will protect the blade from breaking and keep the offset, sharp teeth of our saw away from you . The saw hangs securely at belt level in it, always at the ready even in densely packed branches.

    57,00 
    availability in stock, can be delivered in 8-9 days

  • Like all Löwe shears, these also have an easy to change blade. If need be, you can get replacement parts from us, but the manufacturer also takes back his models for reconditioning.

    For branches up to 2.5 cm Ø. Blade length 5 cm, total length 20 cm. Weight 260 gr.

    A Handy Item For the Anniversary.
    We had the idea many years ago: if one would emboss the tried and tested Löwe anvil shears made by the Gebr. Schröder GmbH with a pretty imprint, that would make them even more handy and better than ever. The anvil shears have turned 90 , which for the manufacturer, who can look back on 145 years of company history, is a good occasion to issue his classic tool with a vine imprint. And with the handles firmly in the hand, the shears don't slip at all and the work is easier to do

    The principle of the anvil shears.
    These shears were never so pretty, but they cut well from the beginning. The principle behind them was developed in 1923 by Gebr. Schröder GmbH in Kiel. It is not just the combination of a blade and a base (the anvil), it's the right materials. The blade must be extermely hard and retain it's edge, but the anvil must have a little give. Therefore it is made of an aluminum and zinc alloy. Anvil shears are used to cut the harder, tougher branches and are suitable as a bypass pruner. Since they require less force and are technically superior to other shears, they are the shears of choice for pruning.

    36,00 
    availability in stock, can be delivered in 8-9 days

  • Stainless steel blade, handle made of plum wood, opposite the blade a boar's bristle brush (length 2 cm), and a leather case.

    Blade length 4.5 cm, Total length 17 cm. Weight 30 gr.

    A beak-shaped blade on one end and boar’s bristles on the other.
    This sturdy knife is made by Herder in Solingen. It is just as serviceable in the forest for picking mushrooms as it is at home in the garden during the harvest. The hardened, rust-free steel blade in the familiar beak-shaped form cleanly slices through the mushrooms, while the brush at the other end stands ready to dust off dirt and insects.

    38,00 
    availability in stock, can be delivered in 8-9 days

  • Forged stainless steel. Handle made of untreated ash, rivets made of brass. Tine length 23 cm. Total length 1.73 m. Width 15 cm. Weight 680 gr.
    David Austin, the famous English rose grower and Sneeboer, the Dutch tool makers, developed this rake together. The tines are extremely thin, but maximally flexible and stable. In order to do that Sneeboer came up with a process whereby a stainless steel wire just 6 mm thick is cold drawn to a diameter of 2.5 mm. The spring-like tines will snag hardly at all between the roses and therefore can do them no harm.

    52,00 
    availability in stock, can be delivered in 8-9 days

  • Forged steel with self-sharpening, hollow ground blades. Length 30 cm, width 7 cm, weight 340 g.
    30,00 
    availability in stock, can be delivered in 8-9 days

  • This ‘one-pronged’ cultivator is good for deep loosening and aerating, and often does it better than a fork. It helps preserve the soil structure, supplies the roots with oxygen, and promotes soil bacteria and earthworm life. Hook width 1.5 cm. Total length 168 cm, projection 26.5 cm. Weight 1.2 kg.
    94,00 
    availability in stock, can be delivered in 8-9 days

  • Lacquered beech plywood. 10 mm thick. Height 8 cm. Working radius 21 cm each. Comes without fastening material.
    For 2 pairs of boots, width 45 cm. Weight 700 gr.
    For 3 pairs of boots, width 66 cm. Weight 950 gr.

    from 34,00 
    availability in stock, can be delivered in 8-9 days

  • Compared to this instrument, nearly all similar products look like something made for the sandbox. From Remscheid, Germany. Carbon steel. Welded-on handle. Length 32 cm.
    11,00 
    availability in stock, can be delivered in 8-9 days

  • You’ll find it difficult to get this kind of sprinkler at you local gardening centre, as it’s part of a special range put specially together by the Swiss firm of Birchmeier. It has a piston pump action giving it the advantage that you don’t need to waste time building up pressure. The container holds 1.5 litres and is suitable for watering both indoor and outdoor plants. The heavy brass pump generates pressure of up to 20 bar, and a brass nozzle ensures a fine spray. Lateral indentations mean it is easy to hold, and the container is easy to fill. Brass. Wooden handle. Plastic container tank (15 cm in diameter). Height 17.5 cm, length 41.5 cm. Weight 750 g.
    88,00 
    availability in stock, can be delivered in 8-9 days

  • This is a pad which fits in the knie pocket of the work trouser. It is 12 millimeters thick, made of natural rubber and machine washable (like the trousers). 22.5 x 16.5 cm. Weight 80 g.
    18,00 
    availability in stock, can be delivered in 8-9 days

  • With two-way head consisting of hook and cutting blade, so you can cut weeds (even with long roots) out of cracks e.g. between paving stones . Forged stainless steel head. Handle of unprocessed ash. Total length 176 cm. Weight 960 g.
    69,00 
    availability in stock, can be delivered in 8-9 days

  • Hand tool for garden and flower-bed . With brass ring. Blade 15.5 x 8.5 cm. Overall length 35.5 cm. Weight 260 g.
    38,00 
    availability in stock, can be delivered in 8-9 days

  • Powder-coated steel, in places galvanized. Plastic spacer. Blade length 5.5 cm. Working width 15.5 cm. Weight 1 kg. Suitable for equipment handles up to 28 mm Ø. Comes without a handle.
    The rotary cultivator effectively prepares flat terrain by chopping and grinding through dense ground in whole beds to prepare them for sowing and planting. Lime or fertilizer can be worked in along the way. And if the topsoil is regularly loosened up, this will help minimize ground water evaporation and keep down the growth of weeds.

    28,50 
    availability in stock, can be delivered in 8-9 days

  • Non-alloy tool steel. Length 36.5 cm.
    21,00 
    availability in stock, can be delivered in 8-9 days

  • Spool with 120 m of twine.
    5,80  Basic price: 0,05 €/1m

    availability in stock, can be delivered in 8-9 days

  • Our planter has an extra-long handle so you can plant your bulbs effortlessly and without getting backache! You’ll also appreciate it if you’re dealing with large numbers of bulbs or with heavy soil. With the help of the smooth conical tip and the foot-bar on the side you can literally punch a hole in the ground. When you make the next hole the soil in the planter is pushed up and out and you can replace it with your foot. Stainless steel, oiled ash handle. Length 89 cm, width 24 cm, 6 cm dia. Weight 1.1 kg.
    90,00 
    availability in stock, can be delivered in 8-9 days

  • Handle made of oak. Blade 5.5 x 4 cm. Total length 130 cm. Weight 600 gr.

    A weeder that combines the precision and feel of a hand tool with the extended reach of a tool with a longer handle. At 600 grams the relatively small but perfectly shaped blade with the sharpened edge including the handle is so light that you can position and maneuver it almost effortlessly. Indispensable in densely planted beds, like vegetable plots, where carrots or onions are growing in close quarters.

    51,00 
    availability in stock, can be delivered in 8-9 days

  • Three carefully stitched quilting seams hold together the straw broom. With regular it will develop the typical swept form without diminishing its efficiency in sweeping up leaves, snow or dirt.

    Handle made of beech wood. Head made of rice straw. Head length 30 cm. Total length 1 m, width 24 cm. Weight 340 gr.
    Caution: not for children under 3.

    9,00 
    availability in stock, can be delivered in 8-9 days


  • 39,00 
    availability in stock, can be delivered in 8-9 days

  • Made in Holland. Stainless steel seamlessly forged by hand.
    Blade 9 x 7.5 cm, fork width 5 cm, tine length 6 cm. Total length 40 cm. Weight 270 gr.

    A small shovel on one side and a slender hoe with three tines on the other. It's used for many different garden chores and work with plants on the balcony, in planters, raised beds or between the herbs, in the rock garden or in the cemetery. The tool is forged as one piece of stainless steel.

    42,00 
    availability in stock, can be delivered in 8-9 days

  • Standard steel, so very sharp, self-sharpening but not rust-proof. The handle is made of pear wood. Handle length 11 cm, blade length 8.5 cm.
    Weight 45 g.

    11,00 
    availability in stock, can be delivered in 8-9 days

  • Glazed, polished, and with hole for hanging up; conical top. Length 150 cm, 25 mm in diameter. Weight 440 g.
    12,80 
    availability in stock, can be delivered in 8-9 days

  • Hand-forged stainless steel. Handle made of oak. Width 4 cm, total length 32 cm. Weight 220 gr.
    At 220 grams, this weeder sits comfortably in the hand and with its small, perfectly shaped blade and sharpened edge can deftly maneuver in densely planted beds with very little effort. That makes it especially useful in vegetable gardens, where there is not much room to work between the plants, or in luxuriously blooming flower beds of shrubs. The hand weeder is an all-around tool for breaking up and aerating the ground, and for chopping and weeding.


    44,00 
    availability in stock, can be delivered in 8-9 days

  • For branches up to ca. 2 cm in diameter. Plastic coated aluminium handles, blade with steel wire-cutter, screw mounted counter-blade with sap channel. Adjustable blade. All secateur parts can be replaced. Length 20 cm. Weight 270 g.
    76,00 
    availability in stock, can be delivered in 8-9 days
    only 6 item in stock! Additional delivery expected shortly.

  • For the upwardly mobile: creepers and climbing plants need supporting. These steel wires are originally used in winegrowing and are covered with paper instead of the usual PVC. They are cut to a handy length. Steel wire 0,6 mm dia., length 20 cm.
    11,00 
    availability in stock, can be delivered in 8-9 days

  • Made from 100% polyamide

    Rostaing produces these gloves made of polyamide as waterproof and washable alternatives to gloves made of more sensitive material. The gloves are good for all garden work in damp or wet earth, withrain soaked plants and in muddy ground. In addition we also recommend them for all jobs done by hand around the garage, the house and the courtyard where wet and dirt are not far away. A cuff with an elastic band helps create a snug fit.

    21,00 
    availability in stock, can be delivered in 8-9 days

  • For digging, loosening and aerating. Better suited than a spade for working in hard, stony soil. Four prongs, length 22 cm. Total length 118 cm, width 18.5 cm. Weight 2.1 kg.
    147,00 
    availability in stock, can be delivered in 8-9 days

  • Of normal corundum. Length 23 cm. Weight 200 g.
    5,10 
    availability in stock, can be delivered in 8-9 days

  • This set contains includes everything needed to sharpen the blades of our hand lawn mower (including abrasive paste and a brush). Comes with detailed instructions. Astonishingly easy to use.
    34,00 
    availability available in 2 weeks, place your order now

  • Calfskin and cotton. The cuff is bound with a cotton ribbon. Can be washed by hand. One-size-fits-all, recommended for children from 10 to 12.
    14,80 
    availability in stock, can be delivered in 8-9 days


  • 39,00 
    availability in stock, can be delivered in 8-9 days

  • The hand shovel is one of the gardener’s most important tools, not just for digging holes for plants, but for many other uses besides.

    Tool head made of hand-forged stainless steel. Handle made of ash. Blade length 11.5 cm, width 5 cm. Total length 24 cm. Weight 160 gr.

    20,00 
    availability in stock, can be delivered in 8-9 days

  • Stainless steel prongs. Rubber tree wood handle. Length of prongs 6 cm, 3 cm apart. Total length 44.5 cm, width 6.5 cm. Weight 270 g. With leather hanging loop.
    31,00 
    availability in stock, can be delivered in 8-9 days

  • This extra concave version enables you to get down to lower levels of soil than ordinary trowels, and is also ideal for shifting larger amounts of soil, sand or compost – for instance, bagged soil into plant pots. Also for manure, mulch, animal foodstuffs, gravel and so on. Its distinctive features are high quality, durability (stainless steel with rubber-tree handles) and a five-year maker’s guarantee. Length 31 cm, width 8.5 cm. Weight 190 g.
    29,50 
    availability in stock, can be delivered in 8-9 days

  • Carbon steel blade, handle made of beech. Blade length 27 cm, total length 43 cm. Weight 130 gr. Comes with a holster made of beech with a leather loop.

    It cuts as smoothly as a knife, leaving behind a clean surface , which makes it more difficult for pests to penetrate the wood. The carbon steel blade is conically ground, not tilted, and its cross section is optimized to produce a clean cut. Its minimal weight also makes the saw easy to control and non-tiring to work with.

    from 38,00 
    availability in stock, can be delivered in 8-9 days

  • Blade made of carbon steel, hard chrome-plated. Handle made of oiled birch plywood. Blade length 33 cm, total length 54 cm. Weight 280 gr.

    The blade's offset, extremely sharp teeth cut smoothly through any branches. What is new with this saw is the handle, which can be held in different positions. It you put your index finger in the hole in the handle, then you can better utilize the strength in your upper arm. If you saw off a branch from underneath, your index finger will help you keep a secure hold on the saw and prevent your wrist from twisting.

    from 50,00 
    availability in stock, can be delivered in 8-9 days

  • Beech handle, forged stainless steel blade; length of the blade 25 cm, total length 39 cm, width 5 cm,
    weight 250 g.

    41,00 
    availability in stock, can be delivered in 8-9 days

  • Sisal twine - a two-ply in this case - is manufactured from the leaf fibres of the »agave sisalana«. The reel, which weighs 3 kg, contains 1350 m (!), ensuring that you will have a supply of twine for many years to come.
    31,00  Basic price: 0,02 €/1m

    availability in stock, can be delivered in 8-9 days

  • Cotton and polyester and acrylic fibre.
    8,50 
    availability in stock, can be delivered in 8-9 days

  • The 'hoopoe' is absolutely ideal for preparing planting surfaces that have been neglected and are overgrown with tough roots. The axe section cuts through the roots, and the pick then loosens the soil. The head is not fastened to the handle – which has a conical shape, meaning that the head sits firmly on the handle only after being struck on the ground. This is a traditional procedure in southern Germany garden tool making, and has a practical purpose: between periods of use the wooden handle can shrink, making the head loose. With this system, the handle adjusts to the head automatically when it's next used. Carbon steel. Blade 21 x 12.5 cm. Axe 16.5 x 16 cm. Total length 105 cm. Weight 2.5 kg.
    69,00 
    availability in stock, can be delivered in 8-9 days

  • Nowadays gardeners often use kitchen spoons or pencils to prick out seedlings. This classic dibber puts an end to improvisation. The rounded points cannot do any damage to the small seedlings and the larger of the points is just ideal for the bigger ones.
    Instead of colourful plastic our pricking wood is made from robust oak wood and can therefore be used for working in wet or moist soil without any problem.
    Turned on a wood lathe in a workshop in Westphalia.
    Oak, length 17,5 cm, weight 10 g.

    5,50 
    availability in stock, can be delivered in 8-9 days

  • Thanks to a thick, roughened latex layer, this glove is impervious to thorns; however, it is still supple and does not restrict the freedom of movement of the hands.

    100% cotton, latex.

    11,50 
    availability in stock, can be delivered in 8-9 days

  • These Japanese secateurs with long carbon steel blades are ideal for shaping shrubs and cutting flowers, thin branches or lawn edges. The blades are hardened to make them non-corrosive and the handles are made of hardened aluminium. With hand shield.
    Overall length 27 cm, cutting length 11 cm. Weight 225 g.

    83,00 
    availability in stock, can be delivered in 8-9 days

  • The pointed blade (14 x 12.5 cm) is of forged carbon steel. Beech-wood handle. Length 50 cm. Weight 530 g.
    29,50 
    availability in stock, can be delivered in 8-9 days

  • Tool head made of stainless steel, 2 mm thick, with robust footholds. Handle made of beech wood. Head Ø 5 cm, length 37 cm. Total length 1.15 m, width 18.5 cm. Weight 1.3 kg.

    Deep growing weeds are not out of range for this garden tool: the sturdy long handle made of solid beech wood will withstand your full weight and force so you can drive the polished blade deep into the ground with relatively little effort. The weeding trowel is also suited for aerating the ground, cutting roots, and for punching plant holes for bulbs or watering holes for tall shrubs.

    72,00 
    availability in stock, can be delivered in 8-9 days

  • Cowhide, vegetable-tanned (leather strength 2.2–2.5 mm).

    Length 15.5 cm, width 5.5 cm. Weight 25 g. Delivery without scissors.

    9,50 
    availability available at the beginning of September, place your order now

  • Whatever is said about Japanese knives is also true of Japanese scissors: they are extremely sharp, as they are made from carbon steel. As can be seen from the embossed characters, all the manufacturing processes, from forging, grinding and polishing to final assembly are carried out by hand (not that you could read all this from the characters). And they are an example of the Japanese love of tools which combines simplicity of design with maximum usefulness. Simply designed to fit the hand they are manufactured from solid metal with a powerful torsion spring and with their hardened blades are suitable for cutting shrubs, roses and bushes.

    Length 19.5 cm, blade length 6 cm, weight 220 g.

    78,00 
    availability available at the beginning of September, place your order now

  • This glass cover on a base of waterproof ceramics (as an additional asset, it’s a pretty camouflage for ugly plastic pots) provides an ideal environment for growing plants.
    Potted herbs like chives or basil keep fresh for weeks with a minimum of maintenance. Apart from that, it is a lovely eye-catcher for every kitchen.
    Height 35 cm, 18.5 cm dia. Weight approx. 2 kg.
    Plant not included.

    58,00 
    availability available at the beginning of September, place your order now

  • Made of untearable polyethylene (weight of material 250g/sq.m.) with reinforced eyes and corners. Comes with sprung stainless steel ‘caterpillar'-type holders and chrome steel claws. Choose from two sizes:
    Length 3 m, width 1.3 m. Weight 1 kg. With 8 sprung ‘caterpillar’-type holders, plus claws.

    Length 5 m, width 1.3 m. Weight 1.7 kg. With 12 sprung ‘caterpillar’-type holders, plus claws.

    48,00 
    availability sold out / no longer available

  • Oiled pinewood, gauze bottoms. Height closed 18 cm, open max. 32 cm, width 57 cm, depth 37 cm. Weight 3.8 kg. Comes with description labels.
    118,00 
    availability sold out / no longer available

  • Powder coated frame. Rubber tires with plastic rims and ball bearings. Soft plastic grips. The frame needs to be screwed together; an assembly manual is included with each mower.

    Height 1.13 m, length 77 cm, width 56 cm. Weight 10.2 kg.

    229,00 
    availability sold out / no longer available

  • Stainless steel blade, ash-wood handle. Blade length 20 cm, total length 35 cm. Weight 70 g.
    15,50 
    availability sold out / no longer available

  • With a low rise, this light, comfortable boot is ideally suited for garden work. The soles have dirt-repellent knobs and an easy to clean profile; the robust jersey lining (65% polyester and 35% cotton) is elastic and keeps dry. The upper edge of the boot has a surrounding border made of cowhide.

    Women’s Natural Rubber Garden Half Boots, boot height at size 38 = 25 cm.
    Men’s Natural Rubber Garden Half Boots, boot height at size 42 = 29 cm.

    62,00 
    availability sold out / no longer available

  • 100% Cotton. Fabric weight 390 g/m². Length 83.5 cm, width 70 cm. Weight 370 gr. Machine washable up to 40 °C


    52,00 
    availability sold out / no longer available

  • Useful for chopping smaller logs. A pair of steel rings hold the wood upright – smaller pieces can’t fall over, and you can pack your hand-axe in too. The basket has a convenient side handle for easy transportation to fireplace! Comes without wood. Height 33 cm, 37 cm. Weight 1.8 kg.
    51,00 
    availability sold out / no longer available

  • Made from 100% cotton. Fabric weight 375 g/m², with a waxed outside layer, and an untreated inside layer. Length 80 cm, width 69 cm, weight 540 gr.

    The waxed cotton cloth outside protects this apron against dampness and dirt, while on the inside a second layer of untreated, soft cotton cloth protects the clothing worn underneath it. This long apron with a bib is sewn in England with three pockets and a walking slit, which provides an extra degree of freedom of movement andhelps while working in a kneeling position.

    59,00 
    availability sold out / no longer available

  • From Sheffield. Indispensable for sifting out stones and rubble when preparing soil for seeds, and for filtering out couch grass and other unwanted roots. Strong wire grill in a sturdy, green steel circular frame. 35 cm dia., height 7 cm, weight 700 g. Grill width ca. 1/4 Inch.
    20,50 
    availability sold out / no longer available

  • Set consisting of trowel, hand-rake and weeder.
    59,00 
    availability sold out / no longer available

  • For direct application on the plants. Comes with complete instructions. Pelleted manure made from 100% pure horse manure. 5 kg in a paper bag.

    Manure in manageable portions.
    Manure is one of the best garden fertilizers for fruit trees, vegetable plots or shrub borders, not only because it contains a balanced mixture of the necessary nutrients, but also because of the microorganisms which set free the nutrients in the ground in the right proportions for plants. In addition it sustainably improves soil structure and water storing capacity. For smaller gardens, the only drawback has been obtaining and especially storing it. But help has arrived: fertilizer made of pure manure in odorless, environmentally compatible pellet form.

    23,50  Basic price: 4,70 €/1kg

    availability sold out / no longer available

  • Pitchfork with 5 tines. Head made of rolled and hardened spring steel. Handle made of ash. Tine length 27 cm. Total length 1.12 m, width 21.5 cm. Weight 1.2 kg.

    Its form and design make clear what it’s for: The five tines are flattened, close to each other and slightly curved like a shovel so it can also pick up smaller material. The compost pitchfork from Schwäbischen Hüttenwerke Friedrichstal (SHW) is a serviceable tool for piling up or reorganizing the compost pile, as well as loading and distributing the compost.

    52,00 
    availability sold out / no longer available

  • Ash-wood handle, glazed. Steel body, hammer tone finish. Rubber prongs, length 5.5 cm. Total length 147.5 cm, width 51 cm. Weight 1.2 kg.
    48,00 
    availability sold out / no longer available

  • Steel, beechwood handle. Two prongs, length 14.5 cm, distance between prongs 3.5 cm. Overall length 29 cm. Weight 190 g.
    27,50 
    availability sold out / no longer available

  • This can be screwed in between the sprinkler nozzle and the piston armature, and makes it easier to spray the underside of leaves – where most bugs are to be found. Brass. Weight 10 g.
    10,50 
    availability sold out / no longer available

  • Cast aluminium. Blade 17 x 10.5 cm. Total length 28 cm. Weight 170g.
    8,00 
    availability sold out / no longer available

Sprachauswahl / Language selection

X

Lieber Besucher,
willkommen im internationalen Onlineshop von Manufactum.

Bitte beachten Sie:
Unser internationaler Onlineshop wird in deutscher Sprache geführt.

Die englischsprachige Version befindet sich im Aufbau und wird laufend erweitert – das vollständige internationale Sortiment finden Sie in unserem deutschsprachigen Onlineshop.

Bitte wählen Sie:

Dear Visitor,
Welcome to the Manufactum online shop.

Please note:
The language of our international online shop is German.

We are currently setting up the English language version – and updating it constantly. You’ll find the complete international assortment in our German language online shop.

Please pick a shop: