Shelf holder
General Information
Discover unique products designed exclusively by Manufactum and made especially for us according to our specifications – you will find these products exclusively at Manufactum.
A recipe for efficiency.
We weren’t the ones who invented this kind of shelving system. We found one in an old, frayed catalogue for office furniture and thought it so convincing that we got to work on production. So, what did we need to make one? Firstly, some trays (like our ivory trays), a stand with a table clamp (courtesy of the laboratory equipment supplier) and a metal goods manufacturer who could make precise brackets for our trays. It took a few prototypes, but the solution we came up with is entirely presentable.
The floor-on-a-stick concept.
The sequence of up to five archive trays ranging from "top" (urgent – pay this bill immediately!) to "bottom" (this can wait) represents an hierarchical prioritization of varying levels of urgency. The individual lengthwise or crosswise suspended archive trays can be pulled out easily by hand and worked on elsewhere. They can also be turned 360°, which for the procrastinator has the wonderful effect that the offending pending unpleasantness can be pushed out of the way with one hand. This by no means banishes them: after a rotation of 360° they reappear again in all their sobering reality. Above all the trays don’t take away space. They flank or even float above the desk.
It keeps the desktop unencumbered.
The set-up is variable.
The shelving system consists of four components:
1. The base clamped to the table, a support rod and three brackets.
2. Document trays which hook into the brackets.
3. An optionally deployable, inclinable, and thanks to the laboratory fitting, a height adjustable document holder made of sheet steel.
4. If in place of the document holders the two additional mounting brackets are used the shelving becomes five stories high.
The trick to floating: Paperwork with territorial gain.
Size can be key, especially with writing desks. When a computer monitor and keypad, a pen or pencil, the usual newspaper and magazine articles, files to be worked on, tax documents and the current work order vye for space on the desk, things can get nasty. For most of us the limits of the ideal writing desk are the horizon (or at least the wall of the office). However, like many utopias, the proportions don’t play along. The office space is limited, never mind the space on the desk. The only remaining frontier is in the third dimension. Floating.
Think dynamically, stack high
Working at a desk is not static, and thinking is certainly not. Good organization can be conducive to such dynamism, and what could be better suited to this than an equally dynamic filing system? We didn't invent this type of filing system. We discovered it in an old, stained office furniture catalog and immediately thought it made sense. What do you need if you want to implement something similar today? You need filing boxes like our ivory boxes, a stand with a table clamp (supplied by Laborbedarf) and a metal goods manufacturer who can make custom-fit holders for our filing boxes.
Shelf concept with an addition
The arrangement of the filing cabinets allows a hierarchical prioritization of different levels of urgency, from "top" (deadlines) to "bottom" (things that need to be done). The individual archive boxes, which can be hung lengthways or crossways, can also be removed with a simple movement to be processed elsewhere. They can also be rotated through 360°. Above all, they do not take up space on top of the desk, but above or even next to it, leaving the desk surface itself free.
The structure: variable
The filing system consists of three components (supplied without contents):
-
Base consisting of a desk clamp, a stand rod and three height-adjustable holders
-
Document trays that are hooked into these holders
-
Optional tiltable and height-adjustable concept holder made of sheet steel thanks to laboratory sleeve
Product Information
Article Number 28474
For loading the stand with a total of five storage trays. 2 tray holders made of black powder-coated sheet steel, 2 galvanized steel locking rings.
Height 7 cm, width 13 cm, depth 15,5 cm. Weight 350 g.
If you have a question concerning this product you are welcome to contact us. For this your E-Mail program will open.
Customer service
For advice, spare parts or special requests - our customer service will take care of your questions and concerns, personally and competently.
You can reach us from Monday to Friday at +49 2309 939095 or anytime at info@manufactum.com
Manufactum
Discover our home brand: We have developed products for you; good things that we have long wished for, but have not been able to find on the market. For lack of alternatives, we have launched choice goods that meet both your and our quality standards.
Explore our home brand