Nemky & Metzler

Beehive bell

Ø 79 mm
Nemky & Metzler
Beehive bell
Ø 79 mm
    119,00 €all prices incl. VAT., excl. shipping costs
    In stock, Delivery in 4-5 days

    General Information

    Perfect Note, Clearly Sounded.

    These bells are musical instruments which are usually found in larger sets and glockenspiels. The bell, which originates in the Middle Ages owes its name to their unmistakable form: it's called a beehive bell in German and a 'Cup-Bell' in English because it looks like an upside down cup.
    In contrast to church bells, whose concave shapes produce complex chords, the cup bell generates a single, very clear note if it is manufactured to very high standards. The manufacturer of this bell uses bell metal, a kind of bronze whose tin component must be very pure (usually 99.99%, which is far higher than industrial standards). The bell is cast in a sand mould in which each bell is poured individually. The bell receives its pure sound in the careful reprocessing of the blank which starts out about a half tone higher as the finished bell. Only by ' removing the casting crust by hand, leaving the inside alone, and by polishing does the note drop in tone a bit, finally producing the exact note by the manual interventions of a craftsman.

    From percussion to casting.

    It all started with a shockingly high-cost estimate. Quite a few years ago, the manufacturer, a trained percussionist, wanted to have a glockenspiel of his own design for his professional work. The cost estimate of the manufacturer was more than 20,000 DM. This was more than the budget would allow by a factor of ten. So, he turned to his family, which had operated a foundry going back four generations. The percussionist had, in fact, learned the trade before he decided to make music. With support from his grandfather and father and a Slovak family of moulders his family had also known for generations, the musical and scientific expert for historical percussion founded his own bell foundry and specialised in medieval bell shapes. The foundry now supplies renowned orchestras and ensembles, while the cup bells are often sold individually, as the 'house bell', as a supper bell or the bell rung on Christmas Eve calling those gathered to the exchange of gifts, or simply as a present for occasions like weddings or baptisms (an engraver can inscribe a name and date).

    Product Information

    Article Number 89089

      Bell bronze casting (80% copper and 20% high purity tin), hand molded, sand cast, deburred, turned and polished. Suspension by means of 5 mm bookbinding screws (brass). Leather loop made of cowhide, vegetable tanned.
      Note on waste reduction: the manufacturer packs the beehive bells by hand in reused, suitably cut remnant cartons, which still clearly show their first life inside (as packaging for textiles, toys, drugstore items and much more).
      Ø 79 mm. Total height 17 cm. Weight 440 g.
      More articles of the manufacturer:
      Have a question?

      If you have a question concerning this product you are welcome to contact us. For this your E-Mail program will open.

      Customer service

      For advice, spare parts or special requests - our customer service will take care of your questions and concerns, personally and competently.

      You can reach us from Monday to Friday at +49 2309 939095 or anytime at

      Gift Certificates

      It is good for everything: With our PDF gift certificates you can choose from the entire Manufactum selection. Pick a motif which you can send by email or print out and present personally, immediately after submitting your order.

      Order now